Yuken Solenoid Valve

These Yuken Solenoid Valve are composed of directional control valves and solenoid operated directional valves combined together. The Yuken Solenoid Valveserve to switch pilot lines and the directional control valves are used to control the direction of the main circuits. Covers provided with various control valves are available to provide optimum control.
 1.competitive price
 2.Good service
 3.Plug in solenoid valve for easier to replace the weak coils.
 4.All spools and bodies are interchangeable by retaining the same tolerance of
 internal leakage.
 5.The wet type solenoid valve which all movable parts are immersed in the oil,
 since those being with cushioning low noise etc., features.
 6.High voltage test up to 1500 V/min.
 7.Insulation resistance test exceeds 100MΩ.
 8.Momentary signal shifting approx. 0.1sec.
 9.Spool shifting approx. 30,000,000 times.

Yuken Directional Control Valve

As a four-way valve, Yuken Directional Control Valve is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home position with all-ports commonly connected until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed.
1. same fuction like yuken
2. reasonable price,quality ensured
3. small,compact
4. ISO standard,the absolute interchanger ability of mounting dimensions.
5. wet electromagnetic design for moving smoothly without impact,noise levels low.
6. 50Hz,60Hz common terminal end line,the number of cycles to solve different problems.
7. the electromagnetic coil body and one ,good heat dissipation,to completely prevent moisture, Hkinds of reel to high temperature.
8. Intert-type magnetic design,very easy to break up groups.

Yuken Hydraulic Directional Control Valve

These are Yuken Hydraulic Directional Control Valve of high pressure, high flow and low pressure drop, the features of which can be materialized by employing a powerful wet type solenoid and the rational flow channel design.DSG Yuken Hydraulic Directional Control Valveis commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home position with all-ports commonly connected until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed.
1. same fuction like yuken
2. reasonable price,quality ensured
3. small,compact
4. ISO standard,the absolute interchanger ability of mounting dimensions.
5. wet electromagnetic design for moving smoothly without impact,noise levels low.
6. 50Hz,60Hz common terminal end line,the number of cycles to solve different problems.
7. the electromagnetic coil body and one ,good heat dissipation,to completely prevent moisture, Hkinds of reel to high temperature.
8. Intert-type magnetic design,very easy to break up groups.9, 100% tested, one year warranty.

Hydraulic Solenoid Valve DSG

These are Hydraulic Solenoid Valve DSG , high flow and low pressure drop, the features of which can be materialized by employing a powerful wet type solenoid and the rational flow channel design.
 1. Double-head, totally interchangeable with original
 2. For various hydraulic systems
 3. Very competitive price
 4. 1 year of warranty
 5. Since surge voltage can be controlled to a very low figure, electronic device such as a computer
 can be used,  without any interference regardless of the surge voltage from the solenoid
 6. Have no spark between contacts, the life of relay becomes longer
 7. Time lag on de-energization of solenoid valve is reduced considerably, which enables the cycle of machines to the faster.
 8. Because of the fluctuant sales situation, the stock Parts are  always changing and the stock list cannot be promptly updated. So please consult the stock situation when you inquire. Every part from us will be tested through technical personnel to ensure the normal use and then deliver to the customers.

Hydraulic Directional Solenoid Valve DSG

Hydraulic Directional Solenoid Valve DSG is composed of a solenoid operated pilot valve and a pilot operated slave valve. When a solenoid is energised the pilot valve directs the flow to move the spool of the slave valve, thus changing the direction of flow in the hydraulic circuit.
These are Hydraulic Directional Solenoid Valve Yuken Type of DSG of high pressure, high flow and low pressure drop, the features of which can be materialized by employing a powerful wet type solenoid and the rational flow channel design.

DSG Solenoid Directional Valve

DSG solenoid directional valve , Same function as YUKEN valve
 1.competitive price
 2.Good service
 3.Plug in solenoid valve for easier to replace the weak coils.
 4.All spools and bodies are interchangeable by retaining the same tolerance of
 internal leakage.
 5.The wet type solenoid valve which all movable parts are immersed in the oil,
 since those being with cushioning low noise etc., features.
 6.High voltage test up to 1500 V/min.
 7.Insulation resistance test exceeds 100MΩ.
 8.Momentary signal shifting approx. 0.1sec.
 9.Spool shifting approx. 30,000,000 times.
 DSG Solenoid Directional Valve Specifications
 These are DSG Solenoid Directional Valve of high pressure, high flow and low pressure drop, the features of which can be materialized by employing a powerful wet type solenoid and the rational flow channel design.

DSG-01

The Yuken Solenoid Valve DSG-01 adds a compact, lightweight form factor, capable of high pressure, high flow, and low pressure drop to the Yuken line of solenoid operated directional valves. Using wet type DC solenoids. Dsg-01 Yuken and shockless valves available.
 High Pressure - Max. Operating Pressure = 31.5 to 35 MPa (4570 to 5080 PSI)
 High Flow Rate - Max. Flow Rate = 63 to 100 L/min (16.64 to 26.42 U.S.GPM)
 Max. T-Line Back Pressure = 16 to 21 MPa (2320 to 3050 PSI)
 Low Pressure Drop - 1.0 to 0.9 MPa (145 to 131 PSI)
 Dust-proof and water-proof
 Dsg-01 Specifications
 These are Yuken Solenoid Valve dsg-01 of high pressure, high flow and low pressure drop, the features of which can be materialized by employing a powerful wet type solenoid and the rational flow channel design.

Dsg-01 Directional Valve

The maximum flow means the limited flow without inducing any abnormality to the Yuken Hydraulic Valve. The maximum flow differs according to the spool type and operating conditions. These are Dsg-01 Directional Valve of high pressure, high flow and low pressure drop, the features of which can be materialized by employing a powerful wet type solenoid and the rational flow channel design.
Dsg-01 Directional Valve Specifications
 1.Valve size:DSG 01
 2.Number of valve positions: 3: three positions   2:two positions
 3.Spool-spring arrangement:: C: Spring Centred, D: No-Spring Detented, B: SpringOffset
 4.Spool type:2, 3, 4,8,9,40,60
 5:Special two position valve
 6.:Coil type: AC:A100 A120 A200 A240 DC:D1 D24 D48 R:(AC DC) R100 R200
 7: Manual override :None: Manual Override Pin C :Push Button and Lock Nut (Option)
 8.Electrical conduit connection: None: Terminal Box Type N: Plug-in Connector Type   N1 : Plug-in
Connector Type with Indicator Light (Option)

DSG Hydraulic Solenoid Directional Valve

These are DSG hydraulic solenoid directional valve for high pressure, high flow applications with low pressure drop, in addition to these features a powerful wet pin type solenoid and the rational flow channel design are used for long life. With a strong magnet and spring force, the valves are tough, contamination resistant and thus ensure stable operation and long life. Hydraulic solenoid directional valvesis composed of a solenoid operated pilot valve and a pilot operated slave valve. When a solenoid is energised the pilot valve directs the flow to move the spool of the slave valve, thus changing the direction of flow in the hydraulic circuit.

Dsg-03 Directional Valve

Dsg-03 Directional Valve Features:
 High Flow rate upto 120 lpm (31.7 USgpm)
 Maximum Operating presuure upto 315 bar (4500 PSI)
 Long service life with average durability of 50 million spool shifts.
 Choose the 03 Directional Valve to meet your need from a large selection available. The Dsg-03 Directional Valve is classified into the two basic models.
 Standard type: Useable at high pressure: 31.5 MPa (4570 PSI) and high flow: 120 L/min (31.7 U.S.GPM)
 Shockless type:A noise at spool changeover and a vibration in piping can be reduced to a minimum.  Stable Operation With a strong magnet and spring force, the valves are tough against contamination and thus ensure a stable operation.
 These are Dsg-03 of high pressure, high flow and low pressure drop, the features of which can be materialized by employing a powerful wet type solenoid and the rational flow channel design.

DSG-03 Valves

DSG-03 Valves Specifications
 1. Max.Flow: 40L/min, 80L/min
 2. Max.Pressure: 315Bar
 3. High Pressure & High Flow Rate
 4. Low Pressure Drop
 5. Compact & Small Mass
 6. Stable Operation
 These are Dsg-03 Valves of high pressure, high flow and low pressure drop, the features of which can be materialized by employing a powerful wet type solenoid and the rational flow channel design.

DSG Series Solenoid Directional Control Valve

DSG Series Solenoid Directional Control Valve used to control actuators and shift the flow direction in a hydraulic circuit. Yuken Hydraulic Solenoid Valves delivering performances up to 291 GPM and 5080 PSI. Product line includes Pilot operated, Manually operated, and Mechanically operated directional valves, and solenoid valves options including Low Wattage, Shockless, and Electronic Relay.
Yuken Hydraulic Solenoid Valves Specifications
 Pmax.: 210 kg/cm2(Spool 6 and 60 types 150kg/cm2 only)
 Rated flow: 100 lpm
 Max. T line back pres.:140 kg/cm2
 Max frequency of operation : 160 cycle/ min.
 Filtration: 25 Micron.
 Ambient temperature range : -5C ~ 60C
Weight: Double solenoid AC 4.6 kgs/DC 5.8 kgs.

DSG Series Hydraulic Direction Solenoid Valve

DSG Series Hydraulic Direction Solenoid Valve
 1. 100% test before sending
 2. ISO, CE Certificate .
 3. high-tech support
 4. Factory production
 5. Delivery Detail: Within 7 days
 6. Lower price and High quality
 7. High Pressure & High Flow Rate
 8. Low Pressure Drop
 9. Compact & Small Mass
 10. Shockless type available
 11. Stable Operation
 12. IP65-equivalent high dust- and water-proof
 13. Usable in products of various standards
 DSG series hydraulic direction solenoid valve Specifications
These are DSG series hydraulic direction solenoid valves of high pressure, high flow and low pressure drop, the features of which can be materialized by employing a powerful wet type solenoid and the rational flow channel design.

DSG Directional Control Valve

These are DSG Directional Control Valve of high pressure, high flow and low pressure drop, the features of which can be materialized by employing a powerful wet type solenoid and the rational flow channel design.
 1. same fuction like yuken
 2. reasonable price,quality ensured
 3. small,compact
 4, ISO standard,the absolute interchanger ability of mounting dimensions.
 5,wet electromagnetic design for moving smoothly without impact,noise levels low.
 6,50Hz,60Hz common terminal end line,the number of cycles to solve different problems.
 7,the electromagnetic coil body and one ,good heat dissipation,to completely prevent moisture, Hkinds of reel to high temperature.
 8, Intert-type magnetic design,very easy to break up groups.
 9,100% tested, one year warranty

DSG Hydraulic Solenoid Directional Valve

DSG hydraulic solenoid directional valve is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home position with all-ports commonly connected until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed.